byp4a55 professor6T9

Linux vmi1105694.contaboserver.net 5.4.0-105-generic #119-Ubuntu SMP Mon Mar 7 18:49:24 UTC 2022 x86_64
Apache
167.86.79.110

File Name : Makefile

#
# arch/arm64/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License.  See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1995-2001 by Russell King

LDFLAGS_vmlinux	:=--no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
GZFLAGS		:=-9

ifeq ($(CONFIG_RELOCATABLE), y)
# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
# for relative relocs, since this leads to better Image compression
# with the relocation offsets always being zero.
LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
			$(call ld-option, --no-apply-dynamic-relocs)
endif

ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
  ifeq ($(call ld-option, --fix-cortex-a53-843419),)
$(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum)
  else
LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
  endif
endif

# Check for binutils support for specific extensions
lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1)

ifeq ($(CONFIG_ARM64_LSE_ATOMICS), y)
  ifeq ($(lseinstr),)
$(warning LSE atomics not supported by binutils)
  endif
endif

cc_has_k_constraint := $(call try-run,echo				\
	'int main(void) {						\
		asm volatile("and w0, w0, %w0" :: "K" (4294967295));	\
		return 0;						\
	}' | $(CC) -S -x c -o "$$TMP" -,,-DCONFIG_CC_HAS_K_CONSTRAINT=1)

ifeq ($(CONFIG_ARM64), y)
brokengasinst := $(call as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n,,-DCONFIG_BROKEN_GAS_INST=1)

ifneq ($(brokengasinst),)
$(warning Detected assembler with broken .inst; disassembly will be unreliable)
  endif
endif

KBUILD_CFLAGS	+= -mgeneral-regs-only $(lseinstr) $(brokengasinst)	\
		   $(compat_vdso) $(cc_has_k_constraint)
KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
KBUILD_AFLAGS	+= $(lseinstr) $(brokengasinst) $(compat_vdso)

KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)

ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
prepare: stack_protector_prepare
stack_protector_prepare: prepare0
	$(eval KBUILD_CFLAGS += -mstack-protector-guard=sysreg		  \
				-mstack-protector-guard-reg=sp_el0	  \
				-mstack-protector-guard-offset=$(shell	  \
			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
					include/generated/asm-offsets.h))
endif

# Ensure that if the compiler supports branch protection we default it
# off.
KBUILD_CFLAGS += $(call cc-option,-mbranch-protection=none)

ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
KBUILD_CPPFLAGS	+= -mbig-endian
CHECKFLAGS	+= -D__AARCH64EB__
AS		+= -EB
# Prefer the baremetal ELF build target, but not all toolchains include
# it so fall back to the standard linux version if needed.
KBUILD_LDFLAGS	+= -EB $(call ld-option, -maarch64elfb, -maarch64linuxb -z norelro)
UTS_MACHINE	:= aarch64_be
else
KBUILD_CPPFLAGS	+= -mlittle-endian
CHECKFLAGS	+= -D__AARCH64EL__
AS		+= -EL
# Same as above, prefer ELF but fall back to linux target if needed.
KBUILD_LDFLAGS	+= -EL $(call ld-option, -maarch64elf, -maarch64linux -z norelro)
UTS_MACHINE	:= aarch64
endif

ifeq ($(CONFIG_LD_IS_LLD), y)
KBUILD_LDFLAGS	+= -z norelro
endif

CHECKFLAGS	+= -D__aarch64__

ifeq ($(CONFIG_ARM64_MODULE_PLTS),y)
KBUILD_LDS_MODULE	+= $(srctree)/arch/arm64/kernel/module.lds
endif

# Default value
head-y		:= arch/arm64/kernel/head.o

# The byte offset of the kernel image in RAM from the start of RAM.
ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \
		 int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \
		 rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}")
else
TEXT_OFFSET := 0x00080000
endif

ifeq ($(CONFIG_KASAN_SW_TAGS), y)
KASAN_SHADOW_SCALE_SHIFT := 4
else
KASAN_SHADOW_SCALE_SHIFT := 3
endif

KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)

export	TEXT_OFFSET GZFLAGS

core-y		+= arch/arm64/
libs-y		:= arch/arm64/lib/ $(libs-y)
core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a

# Default target when executing plain make
boot		:= arch/arm64/boot
KBUILD_IMAGE	:= $(boot)/Image.gz

all:	Image.gz

Image: vmlinux
	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@

Image.%: Image
	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@

zinstall install:
	$(Q)$(MAKE) $(build)=$(boot) $@

PHONY += vdso_install
vdso_install:
	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
	$(if $(CONFIG_COMPAT_VDSO), \
		$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)

# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
	$(Q)$(MAKE) $(clean)=$(boot)

ifeq ($(KBUILD_EXTMOD),)
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
# Therefore we need to generate the header after prepare0 has been made, hence
# this hack.
prepare: vdso_prepare
vdso_prepare: prepare0
	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h
	$(if $(CONFIG_COMPAT_VDSO),$(Q)$(MAKE) \
		$(build)=arch/arm64/kernel/vdso32  \
		include/generated/vdso32-offsets.h)
endif

define archhelp
  echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
  echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
  echo  '  install       - Install uncompressed kernel'
  echo  '  zinstall      - Install compressed kernel'
  echo  '                  Install using (your) ~/bin/installkernel or'
  echo  '                  (distribution) /sbin/installkernel or'
  echo  '                  install to $$(INSTALL_PATH) and run lilo'
endef

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2022-03-28 12:15:32
..	dir	-	root/root	0755	2022-03-28 12:15:32
boot	dir	-	root/root	0755	2022-03-28 12:15:32
crypto	dir	-	root/root	0755	2022-03-28 12:15:32
include	dir	-	root/root	0755	2022-03-28 12:15:28
kernel	dir	-	root/root	0755	2022-03-28 12:15:32
kvm	dir	-	root/root	0755	2022-03-28 12:15:32
lib	dir	-	root/root	0755	2022-03-28 12:15:32
mm	dir	-	root/root	0755	2022-03-28 12:15:32
net	dir	-	root/root	0755	2022-03-28 12:15:32
xen	dir	-	root/root	0755	2022-03-28 12:15:32
Kbuild	text/plain	173 B	root/root	0644	2019-11-25 12:32:01
Kconfig	text/plain	55.43 KB	root/root	0644	2022-03-07 04:07:14
Kconfig.debug	text/plain	3.35 KB	root/root	0644	2019-11-25 12:32:01
Kconfig.platforms	text/plain	6.86 KB	root/root	0644	2022-03-07 04:07:14
Makefile	text/x-c	5.89 KB	root/root	0644	2022-03-07 04:07:14

Team Anon Force

https://t.me/Professor6T9x